Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a WS-C3750G-12S-S switch which is used as a backup for critical switches that have multiple fibre links. In the event the primary fibre link to the 6500 fails, the data will pass through this 3750 to the 6500 at our 2nd site until the link is ...
Our LAN is made up of two sites each with a 6500 and a 3750. All 4 devices are connected via fibre with the 3750s providing a redundant link should the primary link (6500-6500) fail. Diagrammatically it looks like a square.We are running HSRP on the ...
I want to upgrade the IOS on a couple of our Aironet 1310s but do it wirelessly. The bridges I am upgrading are not accessible at the time I wish to carry out the work which is why I am not doing it via a wired connection. It isnt an ideal situation ...
We are running 2 2950s connected via Aironet 1410 wireless bridges.We have had to implement multiple vlans on the remote site and have run in to problems with vtp not running across the link.We added the new vlans to the bridges, trunked the 2950 por...
Can anyone tell me why extended VLANS (> 1024) are not supported by VTP? Is this a Cisco limitation? We recently created a 12xx VLAN and wondered why it wouldnt propogate through to our other switches. Only after some reading did we discover why this...
Thanks for your reply, unfortunately I have to disagree with you for two reasons.1. The release notes for the latest Aironet 1410 image has the following line under Resolved CaveatsCSCeg12593—Bridges now pass VTP information when the native VLAN on t...
Thanks very much for the link, thats been very helpful.One thing I am still confused on is the letters after ipbase etc such as ipbasek9. I couldnt find any information on what they indicated.Thanks again for your help.
