Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I keep getting the above message trying to install an AIR-CB21AG-E-K9 on a windows xp laptop (fully patched). It fails at the "Cisco Aironet Installation Program" stage, rebooting, uninstalling reinstalling all fails. The only software to run is the ...
I am trying to get "ip http authentication aaa "to a 350/1200 ios wireless access point to work using RADIUS (using ACS 3.2 and Cisco IOS/PIX RADIUS Attributes). I can get the 350 vxworks to work by adding"aironet:admin-capability=write+snmp+ident+fi...
Hello, I have the following scenariocat6509-----cat4006-----cat2950-----cat2950I have setup a vlan for span on the 6509, added the monitor session commands on the cat2950's but I can only see broadcast traffic on the monitored port( I see the correct...
Dear All, I am tracerouting between a few 3500's, they running 12.05(WC2) and am experiencing weird results(All in same subnet no acl's). I can traceroute from one 3500 to another and do a debug on icmp and ip packets and can see the packets get thro...
We are running a vpn tunnel between several sites and have 10 user licences at many of these sites. When someone pings an address that is behind the pix we see the local table increase by one address (show local), it then stays in the local table, th...
upgrade to 121-19.ea1a.bin, there is a major bug with cdp using up memory and it not being renewed, either turn off cdp using "no cdp run" or upgrade to another version of software. The software will work for a few days and then die, the console will...
I know about the 10/50/unlimited options for the firewalls, it doesn't explain that pinging an address of a pc that doesn't exist still fills up a local table. ie 8 pc's behind a firewall addressesd 192.168.1.1-8 for instance, If I ping 192.168.1.9 t...
It is an Aironet 350 pcmcia running 8.23 firmware and 5.05 ACU, running on a win98 box, I have also tested it with XP but still no luck, It still seems like the adapter always wants to stay in the native vlan.thanks
It does depend what your native vlan on your trunk links. If you move the management vlan from vlan 1 to another vlan then you should be able to prune vlan 1 (at least from 6500,4000 switches) You can't with the 3500 series switches, they always keep...
