Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a weird issue. Im trying to trunk a 9500 and 3750X switch and although the ports show as connected, they cant ping each other. The 3750 does require the encap dot1q command while the 9500 doesn't and also the 3750 is using a 10gb sfp port whil...
I am attempting to add a new 1141N-A-K9 AP. I have 2 existing APs of the same kind up and running in my environment. I have copied the config from the running APs (AP2 and AP3) to this new AP (AP5) with no luck. Users cant authenticate to it. It conn...
Hello!Im new to voip. I'm taking an online ccna voice course. Im labbing this all up using real equipment. Everything is going great so far however, I've reached a stumbling block. In the lab there is voice traffic that's going from one router to ano...
Thank you Elliot!! This worked!!! Question, is there a debug or perhaps a show command that I could run on either router that would tell or help me identify this as the issue?Side note.. I cant see my post anymore so Im responding over email.Thanks a...
Not sure what that means exactly, but this is what I have for voip service voip on the CME router:!voice service voipallow-connections h323 to sipallow-connections sip to h323allow-connections sip to sipfax protocol t38 version 0 ls-redundancy 0 hs-r...
Honestly, Im not sure about H.323 or SIP, thats what the lab video leaves out. These are the dial peers for the FXS ports:LEGACY_VOICE_NJ#sh run | s dial-peerdial-peer voice 3301 potsdestination-pattern 3301port 0/0/0dial-peer voice 3302 potsdestinat...
Here are the eigrp configs for each:LegacyLEGACY_VOICE_NJ#sh run | s eigrprouter eigrp 1000network 10.1.1.0 0.0.0.255CMECME_Voice_NY#sh run | s eigrprouter eigrp 1000network 10.1.1.0 0.0.0.255network 172.16.1.0 0.0.0.255 They can ping each other. Leg...
