Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I need some help on the 877.Currently, my setup is using the 877 with 0/100 VCI/VPI.Recently, I need to add another VCI/VPI 1/100 for IPTV service.This interface will negotiate for an IP address through 1/100, and needs to be directed to the ...
I am having a real big headache.from the D Link configuration guide, I am informed to port forward:TCP: 1720TCP & UDP: 15328 - 15333to the IP address of the DVC1000.I have done all that, and yet, the DVC is NOT able to answer calls.When someone tries...
Dear all, I have not much network experience and have just bought a 837 to learn hands-on about configuring IOS, so I need guidance from all.I am currently trying to connect into my LAN at home via VPN (embedded software from MS XP2) when I am on the...
look too, those are absolutely not excuses as those are facts which others can see from reading through my posts in this thread.By what you are doing now, following my advice on posting more information, its more like you know the faults but unwillin...
well, at least I am bothered to give more information and even the configuration that I have done for people to troubleshoot and test things out as much as possible.And with me requesting to spoon feed, its to troubleshoot my config, not asking peop...
yup, it definately is true that I was requesting for help, but I have already tried things out many many times, and in the end, its just one single line in my config that is causing the problem. Whereas you simply do not want to read up on what is ha...
Then its a good idea you start reading up.http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml#examplesread on NAT overloading, which is PAT.and read up on how to configure your 837http://www.cisco.com/en/US/produc...
