Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So trying to isolate this and it's driving me nuts ... recent deployment replacing WisM's with 8540's and new 3800 AP's (around 300). and I have both model phones between the 7925/8821 and when standing right below an AP my RSSI is between 30-80, and...
So instead of having multiple scripts, trying to combine 3 into one, see below. It doesn't seem to be adding the strings, any suggestions?
no event manager applet DETECT_CDP_Add authorization bypassevent manager applet DETECT_CDP_Add authorization b...
So I'm having a small issue, the following script will work, but after some time the interface will revert to the detect-AP-remove EEM. event manager applet detect-AP-add authorization bypass event neighbor-discovery interface regexp Ethernet.* cdp a...
Good morning, I'm wondering it if's possible when interface status comes up to add the MAC address of what it learns to the interface, this should also not run on CDP interfaces as i'm running to EEM CDP one already, i'd like this to run to set descr...
I've updated, and the interface still doesn't update once the AP interface goes down; Sep 11 18:38:09.967: %LINK-3-UPDOWN: Interface FastEthernet1/0/43, changed state to downSep 11 18:38:11.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEth...
So this is what I've updated to, and doesn't look the second part is working, any input is appreciated event manager applet detect-AP-add authorization bypass event neighbor-discovery interface regexp Ethernet.* cdp add action 1.0 regexp "(AIR-)" "...
