I am trying to set up IPsec/L2TP connection from iPAQ to VPN3000 with certificates. Preshared keys work fine. I install the certificates with crtimprt, both the Root CA and the User cert is there. When I try to connect I get: "Received non-routine No...
Hello all,A few weeks ago AIM-VPN/EPII-PLUS appeared in addition to AIM-VPN/EPII, but I can't find a doc that describes the PLUS. Can anoybody let me know or show where can I read about it?Thanks,Martin
How can you tell CallManager to display a name to known numbers when they call an IP phone? Is there a possibility to do a name lookup based on calling number?Mobile phones can lookup the callers based on their phonebook, legacy PBXes also can, but I...
I can't find in the docs how to SPAN intervlan traffic on Cat4500/SupIV for IDS monitoring. Imagine that you have a huge server-farm-VLAN, and a huge users-VLAN, and a Catalyst 4500 is routing between them. You want to monitor with IDS only the traff...
Hello,The NM-HD-2VE is a good solution when you need both low-density analogue or BRI and E1/T1.For full 2xE1 capacity you need a different module, NM-HDV or NM-HDV2. You can achieve 3xE1 PRI if you use add an AIM-VOICE for the third one.Hope this he...
Hello, With PoE - if class 3 is supported - full brightness must work. You can have also full brightness with pre-standard inline if CDP v2 negotiations are supported.See:http://cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7970/admi...
with PVDM2s it is always 8, but for more than 8 you can use the software conference bridge, or catalyst modules:http://cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a05confb.htm#wp1035397
according to my experience Outlook doesn't dial what you expect to dial, so it is useful to have a look at trace file of Cisco TSP. You'll find the location of the trace file at the TSP settings.you can then easily workaround this behaviour by settin...
