Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys,i've got four 2960G-48TC-L switches. i have to uplink all four to a catalyst 4500 with a single GLC-SX-MM, and i figured i would connect the switches to each other with GLC-T modules, and uplink the one that is on top of the stack. so the que...
hi everyone,having two ASA 5510 configured in active/standby failover, do i have to buy ssl vpn licences to both devices to extend capabilities? what if i change it to active/active? license in question is ASA5500-SSL-25=. thanks!peter
hi everyone,is there any way to make a 7912G IP Phone work in home environment? simple dsl/cable connection with a soho-class (non-cisco) router... does it have a standalone mode, or call manager is a must? if so, can i install it on the client or wh...
Hi everyone,my customer has a WLC526 with two LAP521G and an external DHCP server. No device can obtain a dinamic ip at all, but by giving fix addresses to the clients the whole thing works just fine, including roaming. Do you guys have any clue what...
hi everyone,i'm a bit confused about the smallest member of the asa family, and i couldn't find any solid info regarding this. what do i need to connect to the fa0/0 (default "outside" vlan) in order to get a wan connection? can it be a simple dsl mo...
well i just realized, that the four uplink port on the 2960G-48TC-L are dual purpose ports, so i'll just use rj45, i don't need the GLC-T at all (but correct me if i'm wrong)
hi Chris,thanks for your answer! so a/a failover is not an option anymore... but even in a/s, having to buy twice the amount of licences we need is a bit of a rip off. are you absolutely sure we need to have the extra license for both devices?
