Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have Cisco unity 4.0+ and was working until last friday.Last friday we performed an Exchange email moves where the email accounts moved from one database to another. One of the accounts moved was our Unity FaxService account.As a result faxes are ...
Hey pros!i wanted to get your opinion on best practice scenario.I want to Nat and Pat a server in our LAN to be accessible on the Internet.configuration:LAN |FW| DMZ |FW| Internetnow cos the server is in the lan and i want to NAT it for the int...
Hi guys, we have a new datalink to a branch site. Configuration:Branch router - 111.22.254.102HQ Gatewateay - 30.30.254.102CCM1 - 11.11.11.1CCM2 - 11.11.11.2Branch office router acts as the remote gateway.3750 Core switch at HQ acts as the HQ Gateway...
Hi, i have a Cisco ASA5510 and a SAN for a DR site and need to simulate WAN replication locally before we ship it offsite.Is the best way to implement QOS Policies?
Hi after having an issue with my ASA 5520 Active/Standby i had disabled the failover on both devices. I then re-enabled the failover by issuing the failover command on the primary device first then the failover command on the second device.sh failove...
Thanks guys. ok i've run the permission wizard, but im weary that it may change other accounts etc as im not too familiar with it. The report didnt tell me too much.Brad, i've ended up creating a 2nd FaxService accoung and have run the configuration ...
Ok, just found some new information. Our change in Datalink also changed routing paths to Branch office. (As i mentioned New Datalink is connected directly to the CORESWITCH, where as the Old datalink connected to an HQ Router then to the CoreSwitch...
Hi,from branch office i can get to http://11.11.11.2/ccmadmin but NOT https://11.11.11.1/ccmadmin (which is expected if i cant ping)30.30.254.102 does have an ARP entry for both CCM's and has the correct MAC's.Default Gateway on both CCM's is the VLA...
Hi, There is a way to get a log of the IM's.. Management asked if it were possible in an even a user is audited..Provided you know what port on the switch the user is on. I ran WireShark on the LAN.. IM's are sent in plain text, so was able to pick u...
cedric, on the device your trying to access, you can,config tip http server enable (to use the enable password to loginor ip http server local (to use login of an account setup locally on the device)then try to connect using CNA
