Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,
I have the following configured: ASA-5506 >>> ROUTER >>> ISP
I have a range of public ip addresses of which the first X.X.X.49 is on the router interface and I need to have .50 traffic go to the ASA. I have already configured the router wi...
Hi there,
I'm wondering if anybody knows the complete steps to send a campaign call that has been answered by a clients voicemail to an IVR port so that the call triggers an Application that will then leave a pre-recorded message stating the reasons...
Hi There,
I currently have 2 x 5510 ASA's in my lab that I want to use for studying the CCNP Security they both have the base licence only, I'm in the process of buying 2 x L-ASA5510-SEC-PL in order to be able to do failover and clustering but I wan...
Hi Ajay,
As I stated originally, I need traffic for the 210.0.0.50 IP address to come to the outside interface of the ASA. The traffic will be for the ASA itself. The ASA is inside the edge router as there's no way to terminate ADSL to the ASA hence...
Hi Ajay,
Thanks for the reply. My question was more "What does the NAT COMMAND look like or what is the NAT COMMAND?"
And possibly would it be easier to do the Natting on the router.
Thanks
