I have an existing 5508 with about 400 APs that has been in place and working well for many years. I am in the process of adding a few new APs and I've had a problem with joining some of them. Out of about 20 APs, about 5 of them have problems join...
Our org just acquired 2 sets of IOT devices that wouldn't connect to our existing SSIDs. The first SSID "Employee" has the following settings:Layer 2 Security: WPA + WPA2WAP2 PolicyWPA2 Encryption - AESPSKFT PSK The second SSID "Guest" is open with ...
I've got an environment made up of Nexus 9372, 3850s, a WLC 5508, and 3802i APs. We just added an high-end audio streaming device that broadcasts live audio over a UDP stream to an Android/iOS app. The "server appliance" end of the device is hardwire...
We recently expanded our AP count from around 150 to 320 due to a building expansion. After looking at some survey results, I saw a good deal of channel contention issues. Surprisingly, 115 of my APs are using channel 36 while no other channels are...
I have two 2960-x switches that I attempted to upgrade from 15.2(2)E5 to 15.2(4)E6.
The new version extracts, the switch reloads, flash initializes, the bootloader looks for a new version, finds 15.2(4r)E3, completes the upgrade, reloads, then I ...
Sure thing. Our situation is very similar to the original post... We are trying to setup redundancy on 9800-Cl in a VMWare Esxi environment. We have followed the deployment guide and have a functioning controller with APs joined and active clients. ...
Does anyone know if this can work when the controllers are on different host servers? Having both controllers on the same host greatly reduces the benefit of HA. None of the configuration guides address this and so far our time working with TAC has...
Thanks - this has been solved. There were some statically assigned APs within the DHCP scope. For some reason (despite conflict detection being turned on) the MS DHCP server was assigning those addresses. Once I figured this out and removed those ...
