Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys,need your advice on this one, as i search on cisco.com and netpro but unable to find the exact info that i required.First, can anyone confirm the following calculation to find out MSS size.Mss size = MTU size - encapsulation size - tcp header...
Dear All,we are having problem as end users have a lot of spyware/walware and have illegal proxy install in the lan.One of the idea is to deny HTTPS or "CONNECT" type http, at the "inside fwsm/asa" to any ip-base url destination. Since the ip-base ur...
Dear All,we have change the computer's name of the installed LMS3.1 and found out the Shortcut icon (LMS icon) still targeting the previous name link. Please guide on how to change the target naming. thank you
Hi,i'm trying to explore the possibility of RME to download the latest IOS(same line with the previous IOS in the router)from cisco.combut i'm afraid that i could accidentally upload the IOS into the working router.I wish to download only the IOS int...
Hi all,should i use mpls ip propagate-ttl "forwarded" or "local" if i want to hide traceroute result in the PE cloud.meaning, only lan/CE traceroute and the internet GW will be shown, and any PE router will be hide. please advice.
just remember one of the links with respect to tcp mass-adjusthttp://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080093f1f.shtmlif taken example of the given link above; i could conclude that:if tunnel MTU is 1400 thenMSS = 1400...
well, i dont think that changing the MTU size at customer part is doable, since this happen at a particular application (site to HQ via GRE tunnel) and on our MPLS cloud. So we can only see the change to be done on CE router and only to MSS size, not...
Hi collin,thank you for your response. perhaps i did not explain a little bit more on this. since i'm on the provider side, that is why i cannot test this from the user/LAN side via ping test.Our customer bring up this matter as one of their applicat...
Hi,i'm not too sure about Guilherme. Not all "cheap" boxes can handle ip address with port inspection since mostly, i guest can inspect the ip address only.18xx series should do the job for simple lan/low traffic design, but if you have higher needs ...
