Nay-Sayer
Level 1
Level 1
Member since ‎03-25-2008
‎02-23-2021

User Statistics

  • 37 Posts
  • 0 Solutions
  • 10 Helpful votes Given
  • 6 Helpful votes Received
Recent Badges
5 Discussion Posts
30 Discussion Posts
20 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
1 Helpful Vote
20 Replies
10 Replies

User Activity

We have an Active/Standby pair of ASA5520 devices connected to the core with a /27 public IP address.  We also have an Active/Standby pair of ASA5525-X devices connected to the core with a /28 public IP address.  The default route from the core goes ...
I have a Nexus 5548 switch that has HSRP configured on several of its VLAN interfaces.  This switch also has a routed interface for a point-to-point link to a remote site.  The routed interface is *not* configured for HSRP, however, HSRP hello packet...
Can't get Netflow information to export from my 3850 into Solarwinds.  I know that Solarwinds is properly collecting Netflow information as it's currently doing so for a pair of ASAs.  Below is my Netflow config:   flow record 9550-to-6111 match ipv4...
We have Cisco Prime Infrastructure 3.0 setup on our network as a NetFlow collector. Currently, the ASA5520 at the network edge is setup to export NetFlow information to CIsco PI 3.0. We're looking to use Prime as a network traffic analyzer to gauge i...
Is there any way to use the ASA 1000V cloud firewall without having to register it with the Cisco Virtual Network Management Center [VNMC]?
Community Statistics
Member Since ‎03-25-2008 01:11 PM
Date Last Visited ‎02-23-2021 12:41 AM
Posts 37
Total Helpful Votes Received 6
Helpful Votes From
Helpful Votes Given To