Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a CUCM 8.6 with telephones 9971.Im testing a EX90, the EX90 has TC4.X (I dont have the release key to upgrade TC5), so I register the EX90 with SIP Protocol.My problem is that I cant to established a session of video between my videophon...
Hi,I want to know which is the best way to migrate from CM 4.X to CMBE 6000.This is the situation:- CM 4.x without UCSS anda essential- No Unity in this moment.- 250 Telefonos (200 79xx/50 fax)Desired deployment:- CM 8.6- Unity Connection 8.6- 250 T...
HelloI have a wave 574 working like an acelerator applications in my Data Center. In the Virtual Blade 1 I installed the NAM according: http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_virtual_blade/4.1/install/guide/vbinstall.htmlThe...
hello everybodyI have a question, I have that:--Remote OfficeRouter 2811 with NM-WAE.--Central OfficeWAE-512 like WAAS CoreWAVE-274 like CMThe Router 2811 has interface WAN (Frame Relay) and interface Tunnel (VPN)to central office.Can optimized the ...
I redirect the traffic (WCCP) in my switch Core, My problem is when I try optimize the traffic in both places and the same time, that isn't happening and I note that the Router Branch has problems because I have dificult to enter through of the conso...
Hi can you send me any document where you found it?"274 can support around 125 WAEs 512-1GB can support 500 WAEs 512-2GB can support 1000 WAEs. "Thanks a lot,
thanks for yours answer, I have a other problem, I installed CUMC in my blackberry 8310,but every time that i try to connect to CUMA show me : error connecting, waiting for retry.I thing that I have the correct configuration in my CUMA and ASA.How ca...
Hi Well, I did the next test in the pix and modem:When the comunication between the pix and the modem is ok, but for any reason the modem or the pix turn off and turn on, the comunication can't be stablished, then I set up the modem in mode router a...
