Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am setting up a new pair of ASA 5585's in a multi-context, active/active failover design. I cannot create management SSH connection to the contexts that are assigned to failover group 2. With all the security contexts that are assigned to failove...
I am working on an old (problem has been occuring since 2009) issue for a client. They have some VMS systems and for certain reasons must run DECnet. They seem to be having intermittent file transfer issues between the VMS servers. The issue occur...
I am setting up a two T1 multilink on leased lines. SInce the site has VoIP I want to set up the Multiclass. I have applied the following configurations:!interface Multilink1 ip address 172.23.0.17 255.255.255.252 ppp multilink ppp multilink interl...
Mike,I tried regenerating the key with no luck so I got fed up and just rebooted the pair of firewalls. Lucky for me these are a new deployment and don't go live until this weekend! Everything is working as expected now. I can SSH into all the ac...
Thanks for the suggestions Mike but I am still stumped. I am running 8.2(4) and it is supposed to have the issues refered to in that doc fixed. I did check the asp sockets and the firewall is listening on port 22. I tried deleting and restoring t...
Thom,I am seeing this same sort of issue with a Nexus 5548P with 5.0(2)N1(1). the servers at issue are Oracle M5000 servers with QLogic CNA's. These servers are configured as dual port, dual homed on the CNA's. This issue occurs when the servers a...
Erik,I am experiencing the same problem on my Nexus 5548 and 7010 switches. Have you made any progress on your case with TAC? I would be most interested to find out more.Thanks,John
Peter,My experience with DECnet is limited and from the days before Cisco existed. I haven't had much call (until this client) to dust off any of the old knowledge. I fully agree with your assessment of the principal of the issue. The switch shoul...
