Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a couple of ASR-920-12CZ-D routers that need upgrading the ios from asr920-universalk9_npe.16.12.06.SPA.bin to asr920-universalk9_npe.17.06.06.SPA.bin.I have two queries please.1. The flash total memory is less 947MB. Less than 1GB. Is this no...
Hi ,Could you please let me know what licenses are required to configure a VG450 in to a CUCM as a MGCP gateway , then use its FXS and FXO ports to connect analog phones? UCS essentials etc. Thanks
Hi,Thanks for your response, so this was the only router out of the dozen that had this space issue. I have managed to upgrade the rest of the routers the normal way, but this one.So here's what happened.1. When the bootflash was cleared , i.e. .bins...
Will post the logs when I'm in the lab next. But I have deleted all other bin files and and tracelogs etc from the flash and still hitting the problem. Thanks for your quick response, I will post back when I have access again. Thanks.
Hi Aseem,My question is about VG450 gateway. We are planning to use this as a MGCP gateway and FXS and FXO ports shall be connected to analog circuits . It is clear in the link you have provided that every analog port requires a UCL essential license...
