HI There, I am testing the always on feature for my company for the remote workers who are issued company laptops, management want all users to be on the VPN when using the company laptop. I enabled always on and it seems to work however i have 3 oth...
I need to bring up a Data center, this will be the Primary and the Other data center in NV will be the back. The NV data center us up. Basically i believe the Configs will be duplicated. I need somebody who can help me with this Turn up.
HI,I have an issue whereby The VPN tunnel between hub and spoke is up, but unable to pass data traffic. Can somebody assist me on how to troubleshoot the issue.Dealer>sh dmvpnLegend: Attrb --> S - Static, D - Dynamic, I - Incompletea N - NATe...
I have an device that use Multicast and is unable to aquire an ip address when connected to a 2960 switch. I have a 3560 switch that is configured with the DHCP scope. We have DHCP pool configured. layer 2, and layer 3 switch's. Basically what’s hap...
HI Kunal,I appreciate the link however i should have been more specific. The two site’s that i want to bring up have a CISCO2821 and one of the site is already up. I will be bringing the other site up and it is configured already and i have attached...
HI Rahul.Please see my Hub and spoke config below, there is a mismatch on the timer and am i right in saying that the mismatch will cause the Eigrp flapping. Also can you send me your email address as well. I have attached teh Logs,Thanks,Anil
HI Rahul, What are the consequences of applying this command, could this drop all the Other connections over the Tunnel. Also do you have a number where you can be reached to discuss my issue further,Thanks,Anil
Here's the config for the Tunnel interface on the Hub Router interface Tunnel0 description DMVPN Hub Primary Cloud bandwidth 10000 ip vrf forwarding vpn ip address 10.209.252.1 255.255.252.0 no ip redirects ip mtu 1400 ip flow ingress ip bandwidth-pe...
