Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Question: Hi all,We need your expertise to help us clarify the NLB configuration on our 5k or 7k switches. We are in the process of migration our email exchange servers from 2003 to 2010. We are implementing Microsoft NLB (network load balancing) on...
We've just added second Full T1 line tothis router to dedicate full T1 bandwidth our two database servers.We are still experiencing the slow performance to our remote location such as file copying and acceessing applications.below are configs and sh ...
We’ve merged two locations into one. We’d like to add new subnet 192.168.201.0To existing network 192.168.7.0Our current devices: 1751 router will be replaced with 2621xm with 2 WICs (2 full T1 lines).We want to dedicate a full T1 line for 2 servers ...
We’ve merged two locations into one. We’d like to add new subnet 192.168.201.0To existing network 192.168.7.0Our current devices: 1751 router will be replaced with 2621xm with 2 WICs (2 full T1 lines).We want to dedicate a full T1 line for 2 servers ...
we are currently running igrp on all routers at HQ and 6 remote branches.We've just purchased new router with new software 12.3 which removes igrp.Is there a way that we can changeall remote router from igrp to eigrp WITHOUT physically going to remot...
Hi Scott, Thanks very much for your helpful info. Just want to clarify the order of the cert installation. First question, we only need ONE new cert for BOTH controllers, correct?Secondly,the order of the cert installation.1. install the new cert on ...
Hi Grisson,please verify with Cisco prior to upgrading your N1k software to a new version to ensure that v.4.2 (1) supports "Mac Static entry". We were able to enter Mac static address after upgrading our 7k to new version. NLB traffic from servers a...
Hi John,Here is the error that we got from the previous reply:We tried to enter static entry in 7kmac address-table static 03bf.0a9c.0284 vlan 10 interface Po2. we received the following error:Error: Multicast/Broadcast MACs are not supported!Thx,Dan...
