Use 9 as you gateway prefix with a speed selection of "auto"(so it supports all dialing speeds), take out the zone prefix 9*, and add a to the remote gatekeeper. This should fix your problem
I am not sure exactly what you are asking but:For H.323 video bandwidth consumption:around 420K for a 384k call (384k plus IP overhead)If you are asking how much bandwidth to configure the gatekeeper:768 = 384 all bandwidth values are configured in h...
There are a couple ways to do this: 1. you can take the video output from a client and attach it directly to the encoder in an IP/TV server.2. You can use a third party product such as starback to join the conference and serve the VC session up as ...
I will send you a white paper that covers this issue: in short I would suggest using the MCM gatekeeper proxy and using the proxy as a single access point throught the firewall.