Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have a problem to make work call-forwarding on my IP Phones Cisco 7942 model. When an external phone (PSTN) calls on an IP phone of the company (where forwarding to an external US national number is setted), the forwarding is not possible a...
Hi,I've five Cisco Phone's 8811 model and an isr 4300 with the "isr4300-universalk9.16.09.03.SPA.bin" Software image.I have configured the call-manager-fallback for the esrst, but when I try to connect the phones They did not register.This is part of...
Hi,
I've a Cisco WLC 5508 with 65 access point attached to it and 16 WLANs configured in FlexConnect. I have upgraded the WLC software with the 8.5.135 version and now I have two problem.
First, I can save the configuration via HTTP web console.
Sec...
Hi,
I've just installed 5 new switches WS-C2960X-48FPS-L in my network. All switches are connected via Port-Channel with two GigaEthernet port into the same central switch c6509.
In particular, when I ping one of this switches, it has a high respons...
Hi,
I've a WLC 5508 running the 8.2.151.0 software version and I try to register Cisco AIR-CAP1532I-E-K9 in FlexConnect AP mode with the port of the switch configured in trunk mode. In this situation the AP doesn't register into the WLC. If i configu...
Hi Maren,that one was between internal numbers, and the issue is the same.Attached you can see the trace with:Calling party phone number : +393311066577 (mobile Italian phone)Called party phone number : +13014777047 (our internal 147) => redirect to ...
My bad, attached you can find the correct trace I just collected.Here are the informations about the call:Calling party phone number : +390731816541Called party phone number : +13014777047 (our internal 147) => redirect to +13015295762Call start tim...
