About Dalmiro.Couto

Dalmiro.Couto · 12-19-2019

Hi guys, I currently running a Hub-and-spoke topology and I only need remote endpoints to reach both a local DNS and an HTTPS internal web page in the HQ subnet.So far I have enabled those subnets and ports and a implicit deny all at the bottom (on t...

Dalmiro.Couto · 04-26-2019

Hi, I was wondering if you have experienced adding a third-party WiFi Access Point to your Meraki network to extend WIFI coverage. If so, tell me your experience.Current Setup: MX64+MR33+Archer C7So far, MX64 manages the network as it act as a securi...

Dalmiro.Couto · 12-19-2019

Great point BrechtSchamp. /24 subnets were allowed during initial setup but I should setup the servers addresses only.

Dalmiro.Couto · 07-19-2019

If you have an MX, go to Security & SD-WAN | Firewall | Layer 7 firewall

Dalmiro.Couto · 07-11-2019

Go to the port settings in Switch | Switch Ports and disable both RSTP and STP guard.

Dalmiro.Couto · 07-02-2019

You can use Active Directory validation or, if you have system manager licences, Systems Manager Sentry VPN security validation.https://n129.meraki.com/manage/support?search_term=4057

Dalmiro.Couto · 07-02-2019

The hostname xxxxx-yyyy.dynamic-m.com works like a free dynamic DNS included with your MX appliance. it should be pingeable from internet. Event log should give you more information of what it went wrong with the VPN session.You should test the VPN c...

Member Since	‎08-16-2018 08:49 AM
Date Last Visited	‎03-03-2021 04:58 AM
Posts	18
Total Helpful Votes Received	6

User Statistics

User Activity

Site-to-site outbound firewall best practices?

Adding Third-party WIFI AP to your Meraki network

Re: Site-to-site outbound firewall best practices?

Re: Blocking outbound connections to countries

Re: MS225 Port shuts down with third party switch

Re: [Question] - How to deploy Client-VPN, L2TP+PSK? CMAK? GPO?

Re: Client VPN Setting