Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to test and then update our corporate AnyConnect Client from version 2.4.0202 up to version 2.5.2019. I have current production clients using 2.4.0202 and everything is working fine as expected. I have a test machine which I installed 2....
I recently got pulled into supporting some remote networks that are using satellite as their WAN connection. They use this WAN connection to provide VOIP, CompanyTraffic and Guest Traffic. I need to setup QoS on a new router to prioritize the traff...
I'm trying to get my 871 to use MS IAS to run Dynamic WEP.Which authentication method do I use?authentication open eap eap_methods-or-authentication network-eap eap_methodsI'm pretty sure I want to use the open eap, but would like a little verificati...
Is it possible to set up a 3750 to act as a default gateway to forward packets within the same subnet?Here is what I have in mind, any problems?The 3750 switch has one vlan and it is on the 192.168.10.0 network.ip route 192.168.50.0 -> 192.168.10.5ip...
I'm having difficulties getting DHCP working on a Cisco 871 Router. Clients on either FE0 or Wireless don't receive an address at all. I have a pool setup on a BVI, with helper-addresses set up on the relevant interfaces, but still nothing. I feel...
That did it, thanks.For anyone searching in the future, on Windows 7 the file is under c:\Program Data\Cisco\Cisco Anyconnect VPN ClientThe VPNManifest from the 2.4 client did work.
Yes, this worked. After some struggle, of course. I ended up creating a class and policy that simply set precedence on the traffic and attached it to the input of the LAN interface and then created a second class and policy that prioritized the tra...
Thanks. This unit is remote, so that is a little problematic, but not totally impossible. Were you seeing the same thing with no matches on the policy-map?
I don't seem to have that option under either the crypto map or under the interface.If it helps, only the CompanyTraffic is going over the VPN, VOIP and Guest traffic go straight out.Also, Ver is 12.3(8r)YI4Any help is very much appreciated!
