Hi,I'm planning to put a cisco callmanager together with a Cisco 2921 with CUBE and a SIP trunk used as primary voice trunk.I'll then have an ISDN acting as back-up for the SIP trunk --> if SIP is not available, calls will be re routed on the ISDN.Is...
Hi,I need to configure the caller ID DN field on my UCM (running software 8.0.3.20000-2). I know that after saving the configuration I need to hit the reset button to have the change effective, and i know also that this will drop all calls (if any). ...
Hi,i'm about to configure a syslog server to receive syslog messages from a Cisco ASA5510 and being it a one week test I was wondering how much space should I allocate on the machine hosting the tool (kiwi syslog).I see that the ASA fills the interna...
Hi,we're planning to implement Cisco IP communicator 7.0, together with UCM 8.0(3) and SIP trunk.We'd like to put this network configuration (that is pretty much the standard one):PoE Switch -- Cisco IP Phone -- PC (with IP Communicator)If we install...
Hi all,I have a client connecting to our FTP server to download the configuration for its branch's terminals (screen resolution, time, date, etc..)this is the configuration:!ip dhcp pool BLA network x.x.x.x 255.255.255.0 dns-server x.x.x.x defa...
Thanks for that.A couple of questions:1 - if the SIP hand off will be a RJ-45, where would it be connected? To a normal switchport of the 2921 would be fine? Or also to a switch that has connectivity to the 2921.2 - The ISDN will have an E1 hand-off,...
Thanks for your answer!Perhaps i didn't explain the problem very well but your answer seems to assume that I'm talking about one client with different sites. In that case what you're saying makes sense to me.What I was talking about was the possibili...