hello I have issues bringing the link up between Nexus 3132Q and Cisco SG500X-48 I use 40G to 4x10G break out cable both sites are cisco transceivers on nexus 3132Q - Transceiver QSFP-40G-SR4 on SG500X-48 - SFP-10G-SR transceiver Break out cable 2x10...

Hello     I found an article https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/nxos/commands/l2/spanning-tree-port-type-edge.html   It was explained how to use the commands: spanning-tree port type edge spanning-tree port type edge trunk   so ...

Hello   My server adapter are all are with 2x40G My router also have 2x40G adapter installed I was going to use those 2 ports like so: Port 1 : switchport trunk allowed vlan 1,2,3,4.... Port 2 : switchport trunk allowed vlan 15,30,32.... for what I c...

hello   what could be the reason to get that kind of ping respond       Switch: 3132Q Router/Firewall: DELL R320 Chelsio T580-SO-CR 2x40Gb ports OS: pfSense Server: DELL R710 Mellanox ConnectX-3 network adapter 2x40Gb ports OS: ESXI VM: Windows Serv...

hello   I am trying to trunk 3132Q-V to 3064-x Transceiver - Cisco QSFP40G-SR4 Cable : Karono MPO to MPO TYPE B Patch Cord, OM3 Multi-mode Fiber, 3.3 ft (1M), 12-core Fibers   Settings 3132Q-V configinterface eth1/49/1-4,eth1/50/1-4,eth1/51/1-4,eth1/...