Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, people. Before the to start to make the questions, i want to thank you for supports.Is there some tools for training concepts the networks, that have all the network commands ?For example in the packet tracer at the router, not have command " ban...
Hello guys,I configured the internet output interface with the ip obtained through DHCP.Now I want to configure static NAT to allow external access to the HTTP server.But as the external address is the address obtained through DHCP.There will be time...
I am using a router as ntp server (it is master).And other devices on the network are configured as slave.When I run the show ntp status command, I check that the slave is not configured with the master address.Can someone help me ?To be more enlight...
@luis_cordovaI installed the GNS3, but not came with the IOS of the equipments.You can, me indication some site that have IOS for the installation at the equipments.Even i am to like this simulator, to appear to be more light
Hi, @balaji.bandiI already resolved the problem.But now i am with new problem.At the slave i synchronize with master, but appear not synchronize.Clock is unsynchronized, stratum 16, no reference clocknominal freq is 119.2092 Hz, actual freq is 119.20...
Hi, @Andrew KhalilDo i can to create a subinterface and assign the a vlan ?For to be more understand :rotuter#> vlan 255router#> interface f0/1.255router#> switchport mod acess vlan 255