Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello @all cisco specialists,I've a serious question relating to my Catalyst WS-X45-SUP7L-E running IOS-XE Release 03.04.04SG with EntServices.I just checked the Cisco software/feature navigator for network address translation in IPv4.Is it really tr...
Hi @allI implemented VMPS (Server) on Catalyst 6509 whichwork`s correct. But on the Access Switch Cat2950acting as VMPS Client the vmps_configuration.db willnot work. The Host connected to the switchport access vlan dynamic and in switchport mode acc...
I have 2 sites linked by an 64kB ISDN-leased line and standard eth 100MB.My hardware are Cisco 3620 and Cisco 1750 for the leased-line and a Cat 3550 with EMI Image.Use a Cisco 3620 for the home office and Cisco 1750 with Cat 3550 for remote.I need t...
I`m looking for tips and help to upgrade your Catalyst 6509 Sup2/MSFC2 for someadditional features like : automatic QoS for Citrix Protocol ICA and Multilayer Switching IP directed broadcast from one Vlan to another one !Last time I wanted to do so, ...
Need Help !I started with aaa authentication local on Pix successfull like:aaa authentication include telnet inside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 LOCALaaa authentication include ftp inside 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 LOCALaaa authentication inc...
Hello Leo, thanks for the first information to my question.I was hoping the catalyst 4500 platform fall into a category of multi-layer-switched plattforms, and performs nat-translations as the catalyst 6500 switches as well. Do you know about other R...
Hi vincentI see you are in trouble with static NAT/PAT in configuration on your 837 Router. I have an equal constellation with a 837 Router in UK and a Pix 515Ehere in germany. Dynamic VPN for VP-Client's and Side-To-Side VPN between Router and Pix.I...
Hi gwcrookThanks for your response. This helps.I resolve the problem with "" in the last line.This is an other method to resolve the problem !Thanks and regardsfschneebeck
