Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We have an issue with our AMP for Endpoint connectors since day 1.
Either we choose not to ask for reboot when applying product update or not, it will asks us to reboot. This problem is occurring on all of our policies.
Anyone having this ...
Thank you for sharing this. We opened our TAC case and linked this thread as well as the two Bug IDs to help support with this issue.Even if we rollback, we will collect what they need to fix this issue for good in 15.X but right now our operations a...
We can confirmed that we tested the following downgrade scenarios on 2 endpoints (Jabber clients) :15.2.2 to 15.2.1 => Same Issue without doing a AppData clear, Cleared Local and Roaming AppData and issue was still present.15.2.2 to 15.0.1 => Same Is...
Having the same issue here too. We run 15.2.2 and the issue is present on calls within the same network or with VPN.We took several PCAP of multiple scenarios and I cannot see delay showing up on either end on the PCAP but there is still a noticeable...
Hello,
I was able to register my CP-8832 to my Call Manager 11.5.1 by proceeding like so:
Symptoms:
Device power on and boots on default Firmware then receive the new firmware from your TFTP, reboots and goes into "Connecting" mode in a loop.
Sol...
