Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good afternoon;They have some experience in being able to configure the frequency coverage in the AP cisco, I have a WLC where I administer, the ground floor I can see that the coverage is very wide and from the exit to the street you can see the ssi...
Hola tengo un equipo C9500-48Y4C STACK version IOS XE 16.8.1 con QSFP-40G-SR4-S y FO Cable 12F OM4 MPO12-UPC(F)/MPO12-UPC(F) LSZH Tipo A para realizar Virtual STACK entre los dos equipos pero no funciona tienen alguna idea de como puedo continuar?Alg...
La verdad que actualice a la version 10 aun no lo probe pero si fui a la version 16.11 y 16.9 pero tampoco no funciono.El tipo de cable en la que funciono es 12F OM4 MPO12-UPC(F)/MPO12-UPC(F) LSZH Tipo A ; pero 12F OM4 MPO12-UPC(F)/MPO12-UPC(F) LSZH...
Today, in a last consultation, we tried to lift the link with a 10G long-distance sftp and the interface could not be lifted either.I had the following record:SW-SWITCH# sh interface ethernet 1/49 transceiver detailsEthernet1/49 transceiver is presen...
