Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I can suggest additional tests:1. Try to ping each client from switch, but with source interface of different SVI: - ping 192.168.20.40 source vlan 10 - ping 192.168.10.40 source vlan 202. If it doesn't work, then it might be the problem on PC...
Hello,If you would like to have dynamic routing between 3750 and each N7k in vPC pair, you don't need HSRP (I believe it would not work anyway, since OSPF will use interface address as source). Also, you can't use single vPC VLAN with /29 mask and as...
Andditional info, just to make it clear. In post above, when I describe problematic scenario, I refer everywhere to L3 interfaces (SVI - interface VlanX with IP configured ). You are right, ICMP redirects is pure L3 feature, so here we need to consid...
Hi Jan,Thanks for update. Actually, the main place, where "no ip redirect" should be configured - it's 6800 Core switch, interface which has ip address 10.180.10.254 (VLAN200, I believe)Sorry, probably, I was not clear enough, explaining the scenario...
Hello,Thanks for diagram. Can you clarify couple of questions:1. What is the mask of network 10.180.10.x? Is it /24?2. What device is default gateway (or next-hop) for WLC to reach AP subnet? Is it 6800 switch 10.180.10.254?3. What is default gateway...
