Hi Agnes,   Thank you for your interest. Please go to beta.webex.com and register as an user. Once you are signed up, go back and login. Once you login you will be presented with a set of programs. scroll down to "webex calling". Then, you can "Apply...

It looks like you are sending a name in the facility message - "Oses Arie". Not sure if that is a name. The PBX does not like that facility message. So, You should find out what that message is. if it is a name, see if calls work when you stop CCM fr...

This is an incomplete trace..Here is what I can tell:Kim Glen called 94162489195'0040373C87D8B11D781C0000AC110094'H is the H323 Call ID. it goes from setup to connect state (it has already gone thru alerting, which means the user heard a half a ring)...

see if this CCM service parameter helps:Hold Type : This parameter determines whether the handset lamp winks or flashes when a call is on hold. Valid values specify True (handset lamp flashes) or False (handset lamp winks). This is a required field.D...

Yeah that is right.If the PC port value is set to a higher speed and duplex than that of the uplink port, the Cisco ATA automatically sets the PC port value to the maximum speed and duplex allowed by the uplink port. also, this is supported only on s...