Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I would like to leak a prefix (loopback) from the GRT to a VRF than advertise it in the L3VPN but it doesn't work: asr9901-1:interface Loopback36ipv4 address 36.36.36.36 255.255.255.255 RP/0/RSP0/CPU0:asr9901-1#show route 36.36.36.36Mon May 31 ...
Hello community, Previously, on ASR9K (OS version: 6.2), I used to backup the admin config file stored in disk0:/config/admin/admin.cfg by using the command: copy disk0:/config/admin/admin.cfg tftp://x.x.x.x But now, I'm using the version 6.6.3 and I...
Hello, I have two separate streams at the input of my L3 switch. The first stream is marked EF and the second is marked AF11.I would like to check that the EF traffic is prioritized in case of congestion.I started by configuring two separates class-m...
Hello,I have a CE router (ACME2) connected to an MPLS network connected via a PE router (PE-2).The probem is: ACME2 router is not advertising connected route 192.168.50.0 to the PE router (PE-2) ACME2: ACME2#show ip bgp neighbors 192.168.5.1 advertis...
It is not available:RP/0/RSP0/CPU0:ASR1#dir disk0:./admin.cfgTue Mar 24 10:09:11.823 CETdir : disk0:./admin.cfg : Path does not existRP/0/RSP0/CPU0:ASR1#dir disk0:./Tue Mar 24 10:09:16.616 CETDirectory of disk0:./260097 drwxr-xr-x. 2 4096 Dec 10 03:0...
Thank you for your help, it's working now.I thought it could not come from that because the subnet 192.168.50.1/32 is in 192.168.50.0/24, so I'm advertising a whole network even if I'm using only one address
