Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have 3 FWs ( A-->B-->C). A and B are connected over ther internet and B and C are connected in the internal NW. So I can form a ipsec tunnel between A and B using the outside interface on the both FWs. At the same time, I need to create another ...
hi,I am seeing following log messages in my 1721 router. Can anybody tell me how to stop this or this is normal..Dec 10 12:19:35.270: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 102 changed to upDec 10 12:19:45.298: %ISDN-6-LAYER2DOWN: Layer 2 f...
Hi,I have a 3745 router to be terminated with E1(G.703 o/p). The router interface is NMCE1B and has DB15 interface..Any idea how can i use it to terminate G.703... from service provider.. Any cable specification that can be given..Thanks,
Hi,I have a LL (2mbps) one end of which is having V.35 o/p and the far(remote) end it is G.703 o/p.These are the o/p from the modem. Would they work with each other.... sample config would be more helpful...Thanks,
Hi,I have a 2960 with LAN Base image. It seems that it allows all the mac-address apart from that provided in the Mac ACL. My idea is to allow only the mac-address applied in the ACL. I have other 2950 switches which are working fine with this type o...
Hi Satish,Thanks for you information... Things look to be fine from the config pespective. But for the backup, I am using floating static route. Could that be the reason for this...Thanks,
Hi,Here's the ISDN config and the sh isdn o/pinterface BRI0 bandwidth 128 no ip address encapsulation ppp no ip route-cache cef no ip route-cache no ip mroute-cache load-interval 30 dialer pool-member 1 isdn switch-type basic-net3 isdn point-to-point...
Hi Shiva,Thanks for your info... Actually, my isdn is a backup for a dedicated link which is currently up but still I am seeing these messages... Any idea, what could be this issue,...Regards,
