Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are working on Deploying our new 9800 controllers and have ran into an issues with the N+1 failover.We are running -CL 17.9.3 and have the Latest APSP applied.We are using flex connect and all the configs are synced. When we move an AP from one co...
We have Sites 1 and 2 connected to our MPLS Provider and also have a Backup link between Site 1 and 2 using a different provider for vendor redundancy. We are running OSPF between all the Sites and the MPLS all in Area 0.We want all traffic to route ...
Hello Everyone,I have been trying to deploy Jabber (11.9) in Phone Only mode on CUCM 10.5.1. I found alot of information on the topic and have now reached the point where i need to see if the community can help.As far as I know I have done everything...
I ran the debug through the tool and it did not flag anything ... the config analyser also did not bring up anything relevant.Thank you for the suggestion.
They Originally mentioned that it could be Cisco Bug: CSCwf78020 so we installed the APSP that is supposed to have the fix and the issue is still happening. They have not mentioned the other bug. They have not been very responsive and the only logs t...
I had started exploring a similar option and this seems to makes sense. So you redistribute OSPF 10 into OSPF 15 on R4 and R5. Then what do i need to redistribute from OSPF 15 into OSPF 10? I understand about using a route-map but not sure what needs...
