Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, i would need some help with proof of concept. We have 2 sites and we want to use QINQ. We want the Provider to be the one adding and removing the outer tag. So for ingress, the Provider add the outer tag ex 4000 and before it sends it out egress...
Hi, I just started working with Huawei switches and it is possible to make a switchport hybrid port and tag untagged frames. See the below Huawei commands.port link-type hybrid = command to make a switchport hybrid in Huaweiport trunk pvid vlan x = c...
Hi, i am trying to understand how vrf, rd, and route-target import/export works. I have this simple topology and i am running iBGP between the routers in vrf 865, neighborship has been established and i have configured same rd and route-target on bot...
Hi guys! I am a newbie and trying to learn and understand BGP when connecting to two different ISPs with multiple(2) local routers. I have vlans that span, using sub-interfaces and HSRP between CORE1 and CORE2. CORE1 is the ACTIVE HSRP thus forwar...
Hi, I am trying to setup a lab with vWLC and AP to practice with. But i am cant download the vWLC Cisco Wireless LAN Small Scale Virtual Controller Installation with 60 day evaluation license. AIR_CTVM-K9_8_5_151_0.ova at https://software.cisco.com/...
Hi, thanks for the reply. But it does not work when i do it the way you suggest. What happens is that traffic from Branch to HQ gets tripple tagged instead. See screenshotI am now using c8000v image and i do not see the bitlist issue and it is workin...
Hi, no it has nothing to do with voip. It is just the ability to make a switchport hybrid in Huawei switches and then be able to tag untagged traffic coming in on the trunk for example. I guess Cisco does not have such.
@MHM Cisco World i will try it and see. I just started working for network service provider and they are using huawei devices, so it is kinda confusing as i am more into cisco. But that is the kind of setup their are using to separate each ISP and to...
Hi, thanks for your help. I think i fully understand it now. The import/export is to enable the routes to be put in the correct vrf and the routes must be advertise via the network command or redistributed before the neighbor router can see them.
