About finn

finn · 05-07-2024

Trying to set up new sg350 10 p - tried using the config file from one used and working but it failed and needed factory resetmy other one has the leds turned off so have no idea what I should see ports 1 to 8 light green on left light only when usi...

finn · 04-13-2019

Trying to set up sg350 with 3 or 4 vlans from pfense box onto 1 port for distribution to a Unifi AP to provide 3 separate wifi networks - VPN, Clear-net and guest.On vlan membership nothing seems to work setting 3 vlans to share the port as can be d...

finn · 04-18-2019

Thanks for the help!seems to be working now after I changed the single vlan ports back to level 2 - the design I had was for them to be level3 - no idea if that was the problem tho but non of them show as UP just untagged and cant find a way to get t...

finn · 04-17-2019

Update,Hours later....For some reason I cant work out if an connection is set to 192.168.1.253 and connected (ifconfig gives address as 192.168.253 pings ok) the web config page @ 192.168.1.254 connects.Ive no idea whats going on here but something s...

finn · 04-16-2019

Thanks for your reply.Unfortunately I cant seem to access the switch to do anything! Been trying of hours and nothing. Pings reply - dedicated connection on 192.168.1.254 but everything else fails no web page ssh refused no telnet. I reset it and sti...

finn · 04-14-2019

This is what I'm aiming for

finn · 04-14-2019

also cant seem to find a way to be able to have the greyed out bits of the bottom of this frame - i'm working from a guide for sg300 and the sg350 interface seem way different

Member Since	‎04-13-2019 10:44 AM
Date Last Visited	‎05-11-2024 01:34 AM
Posts	9

User Statistics

User Activity

SG350-10-p

sg350-10p 3 VLANs for unfi AP on to 1 port

Re: sg350-10p 3 VLANs for unfi AP on to 1 port

Re: sg350-10p 3 VLANs for unfi AP on to 1 port

Re: sg350-10p 3 VLANs for unfi AP on to 1 port

Re: sg350-10p 3 VLANs for unfi AP on to 1 port

Re: sg350-10p 3 VLANs for unfi AP on to 1 port