About philclemens1835

philclemens1835 · 02-16-2023

It's interesting that on our FT1 tray in this chassis only two fans are spinning, as opposed to all of them on FT0. After looking around our network, I see a few more similar situations in other chassis. At first I assumed it was a power saving fea...

philclemens1835 · 09-28-2022

We've been informed that, while the A9K-24X10GE-1G-SE was not in the recent Lightspeed EoL announcement, its future is likely short-lived. Our SE has recommended something like trunking 40G or 100G to a Catalyst to provide 1G and 10G connectivity to...

philclemens1835 · 07-14-2022

Working on optimizing a prioritization and marking config, and have a couple of questions about classifying traffic.If I have a 30 line ACL that I'm matching on for a class, is it more efficient to continue using the ACL or is it better to add the "m...

philclemens1835 · 06-29-2022

We have a collection of 9006's with RSP-440's running 6.4.2 Classic. We'll be upgrading these boxes to RSP-880's with some MOD-200's to support our 100G links using the MPA-1X100G's. Some documentation on the CPAK's indicates we need to upgrade to ...

philclemens1835 · 05-06-2021

We have a number of situations where we are interfacing with CE's using 1000BaseSX (both SFP-GE-S and GLC-SX-MMD). It's not the case every time, but there also doesn't appear to be much of a pattern. I'm curious as to why this command would be requ...

philclemens1835 · 05-02-2023

Thanks. That answers my question. I hadn't dug in enough to see that it used MPO-24. Interesting that a standard port channel maxes out at 8 links, but if we're using it for a full 100G link to another router, there must be a different method that...

philclemens1835 · 05-01-2023

Jumping onto this thread, and also @tkarnani Is there a good data sheet or Cisco Live presentation that explains the passive breakout cable? If SR10 is 10 distinct wavelengths within the 850nm band, how would each of the 10 then interact with a SR t...

philclemens1835 · 02-16-2023

Thanks Sam. You're right, I can see that when we installed this router we received those messages. They were likely ignored at the time due to the other hundred messages that scroll across during the boot process. Thanks for the help.RP/0/RSP0/CPU...

philclemens1835 · 12-15-2022

Looks like you're using non-Cisco SFP's. Try adding this line to your interface configs:transceiver permit pid all

philclemens1835 · 08-03-2022

One thing I've seen is when the link gets saturated, BFD packets can drop and bring down BGP. This can be solved with a service policy that prioritizes BFD and BGP, or simply any communication between the two interface IP's involved on this link. J...

Member Since	‎04-22-2019 08:43 AM
Date Last Visited
Posts	95
Total Helpful Votes Received	36

User Statistics

User Activity

ASR9006V2 Fan Tray ASR-9006-FAN-V2 Not All Fans Spinning

1G and 10G LC Options after Lightspeed EoL Announcement

Traffic Classification Questions

CPAK IOS-XR Compatibility

ASR9K 32-bit 6.4.2 1000BaseSX Negotiate Auto

Re: A9K-2x100GE-SE break out support 10x10G

Re: A9K-2x100GE-SE break out support 10x10G

Re: ASR9006V2 Fan Tray ASR-9006-FAN-V2 Not All Fans Spinning

Re: Two A9Ks directly connected cannot communicate with each other

Re: ASR9000 BGP issues