Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear ALL,
We are using the 2 x C9200L-24T-4X(17.12.05) as stackble L3 core switch(Hold all subnet gateway) and has 4 x C2960 switch as access layer switch(using ether-channel connece to c9200L), the spanning-tree mode is rapid-pvst. We found our ne...
Dear Sir,
i'm sourcing the industrial ethernet switch, the requirement is 8*10/100/1000BASE-T PoE++ Ports,16*10/100/1000BASE-T PoE+ Ports and 4*1G/10GBASE-X SFP Plus Ports. i checked the data sheet, "16 ports 10/100/1000M PoE+ and 8 ports 100/1000/...
Dear ALL,
We are looking to use C8300-2N2S-4T2X with SD-WAN deployment, and want to use AppQoE feature, Is it IOSXE-CTRL-MODE-PF included the AppQoE license? or any SKU for AppQoE ?
Support
Dear ALL,
I'm implement the WLC + Freeradius for MAC auth, but i found the WLC always sending the "secret" as User-Password in "User-Password" attribute, the Freeradius will show "Access-Reject", if the freeradius attribute’s Cleartext-Password to ...
Dear ALL,
I'm newbie in Cisco UC platform, we purchased new UC Phone 7841, i have the S/N, ip-phone's MAC address and extension, but i dont know how to add into UC and use it, anyone can help it?
Support
this ping success or not ? forus traffic (i.e. ping to SVI) is same before and after ??
This two times ping is success.
there is huge number of ICMP redirect ?
Yes, this switch is the layer3 switch. broadcast there is 300 drop but I dont think it hu...
Before:
show plat hardware fed switch active qos queue stats internal cpu policer
CPU Queue Statistics============================================================================================(default) (set) Queue QueueQId PlcIdx Queue Name Enabled...
I have PC1 in VLAN100:192.168.100.10 & GW:192.168.100.254 and PC2 in VLAN200:192.168.200.10 GW:192.168.200.254 & GW:192.168.200.254, I used PC1 to ping 192.168.100.254,192.168.200.254 and 192.168.200.10, i only got packet lost on 192.168.100.254,1...
Ｉ did some testing, i setup the two PC(PC1 and PC2) in VLAN100-PC1 and VLAN101-PC2, then PC1 use "ＰingＩnfoＶiew" to ping the default gateway(this IP is VLAN interface IP) and the PC2 host, i got packet loss in default gateway, no the PC2 host is an...
