Dear Sir,
i'm sourcing the industrial ethernet switch, the requirement is 8*10/100/1000BASE-T PoE++ Ports,16*10/100/1000BASE-T PoE+ Ports and 4*1G/10GBASE-X SFP Plus Ports. i checked the data sheet, "16 ports 10/100/1000M PoE+ and 8 ports 100/1000/...
Dear ALL,
We are looking to use C8300-2N2S-4T2X with SD-WAN deployment, and want to use AppQoE feature, Is it IOSXE-CTRL-MODE-PF included the AppQoE license? or any SKU for AppQoE ?
Support
Dear ALL,
I'm implement the WLC + Freeradius for MAC auth, but i found the WLC always sending the "secret" as User-Password in "User-Password" attribute, the Freeradius will show "Access-Reject", if the freeradius attribute’s Cleartext-Password to ...
Dear ALL,
I'm newbie in Cisco UC platform, we purchased new UC Phone 7841, i have the S/N, ip-phone's MAC address and extension, but i dont know how to add into UC and use it, anyone can help it?
Support
Dear ALL,
I had do many ping test to WLC, i found that if the repeat count is over 200 , it must get the packet lost.
May i know the WLC ICMP rate limit?
Support@ACMEHK
one more thing, how to use the old BGP community format? i had set the community is 1000, but the fortinet recevied is 0:1000.
tw#show ip bgp 99.151.144.0BGP routing table entry for 99.151.144.0/24, version 10Paths: (1 available, best #1, table Def...
this is strange issue, i ping to any PC or switch is no packet lost, no matter use 1000 repeat count or packet size.
i applied the "qos queue-softmax-multiplier 1200", but still get packet lost to WLC.
Attached the result for your ref.
Below is my test result
1. ping WLC management IP repeat count 100 byte 100, no packet lost
2. ping WLC repeat count 200 byte 100, has packet lost
3. ping WLC repeat count 300 byte 100, has packet lost
4. ping WLC repeat count 100 byte 400, no pack...
Dear ALL,
I had fixed the routing issue,the fortigate can receive the two 0.0.0.0, but the 0.0.0.0 weight from switch is bigger than the fortigate generated default route.
Support@ACMEHK