I am looking for the offline bundle for the UCS drivers for the B200M3 / VIC1240 (UCSB-MLOM-40G-01) HBA and Ethernet adapters. I downloaded the files off of the ISO, but none of them work in VMWare Update manager. The ENIC and FNIC drivers for 5.0 ...
We have deployed a UCS Domain, with ESX 5.0, Update1, with dual iSCSI Boot NICs to a NetApp Filer. No issues. From the ESXi hosts, we can ping and vmkping the iSCSI address. I added two hosts in Maintenance Mode to the Nexus 1000v. All communicat...
SOLVED:Inside UCS, all VLANs are trunked and not native, EXCEPT the iSCSI VLAN; The iSCSI NICs needed to be set as the Native VLAN to allow the hardware to boot from the iSCSI devices, since there was no OS to allow us to assign a specific VLAN until...
Sunny, with a NX5K you don't need the MDS. In addition, you could direct connect the SAN directly to the FI if you wanted to. It really depends on how many ports for FC connectivity you will be needing. Is there a backup solution that will attach ...
