Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,
I'm in the process of building out some new 4507RE with Sup 8-E (old I know, it's what I've got though) and I'm curious if there's a way to make one sup module preferred over the other? The reason I ask, my console connection from my terminal ...
All,Do we need to enable authentication for passive interfaces in OSPF? I don't see any reason to, as there won't be any peerings or even any LSA's going out the passive interfaces, just wanted to verify. I'm thinking more of a loopback interface for...
All,I'm part of a project to upgrade a univeristies campus network, and we're looking to move towards an MPLS structure. Now, I'm not really that familiar with MPLS, and I've been studying up on it to get to the level I need to be at. None of the oth...
My boss is pushing me to make the switch configurations for our access switches as simple as possible. Basically there would be an access switch connected directly to my core switch, a Catalyst 4507. I'm not real crazy about the idea of using the upl...
All,I'm looking to hook up a WS-2960-24TC-L running IOS 12.2.(rev 44) to a Catalyst 4507 on a WS-4448-GB-SFP card. I'm using two GLC -LH-SM SFP's to connect across 62.5 m Multimode Fiber. The distance is around 1200 feet, so I'm using mode conditioni...
Andy,Thanks for the reply. First off, let me say that I completely agree with everything you're saying. I am not a fan of using the firewalls to route everything. That decision was made by someone that gets paid a lot more than me. Our core devices a...
Jon,Thanks for the reply. I probably need to clarify a little to make things more understandable, so here goes:We have about fifteen VLANs with 1 subnet per VLAN. Each building in the manufacturing plant will be assigned a VLAN, which will have vario...
Giuseppe,I've included the info you requested, I've not heard of the VMWare issue, but the first reload took place before any VMWare was being used. I have recently installed it, but haven't used it in the area that it reported causing the shutdown. ...
