Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all, I have taken over a network configuration from a customer with mixed devices of different brands (from router, firewall switch and access point) there is no product of the same brand.I bought a meraki mx as router/firewall with advanced (pr...
Dear All,I have upgraded firmware on 3 CBS 350-48P-4G switch (image_cbs_ros_3.1.0.57_release_cisco_signed).after upgrade, I have rebooted to load new Image and all work fine. after some days, 2 switch have this issue: from http page after insert cred...
Dear all, I have some AP AIR-AP1832I-E-K9. One of this is configured as Primary and master controller and all others are configured as AP ME Capable. I have configured a new Vlan (for mobile devices) and configured for this, a DHCP pool server using...
The device has static IP, I tried http and https login, same situation. I'll test your tips and let you know. tnx in advance for your support, regards, Alex
The issue is permanent condition with controller on-line. last test:On controller I have deleted SSID.Deleted DHCPCreate a new DHCPCreate a new SSID and associate to Vlan (nr. 60) with DHCP (new one)Saved changes.Connection test on AP controller: OK!...
The SSID is configured only in the controller. Other APs, are slave and after applied policy all use same configuration. My question is: Why this SSID on primary controller work fine and on the other no?All APs are connected and configured in the sam...
