Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe've got three routers, one 1921 and two 1811. We've configured policy based routing on these two devices, and it seems to be working fine for the one router 1811, but on the 1921, the policy routing doesn't seem to be doing anything/working. Th...
HiWe are trying to setup a router with two internet feeds both of them doing IPSec VPNs back to a single peer...one of these VPNs is for VOICE traffic and the other is for DATA traffic...we have a default route set out one Internet feed which is the ...
HiWe've recently setup our ASA SSL VPN to use our RSA Authentication Manager 7.1 system via the native SDI protocol. It is working great but I'm wondering if there is some way to have the ASA and the RSA server exchange 'group policy' information......
HiI've recently switched from using a static default IOS SSL vpn policy to (default-group-policy xxx) Cisco RADIUS (CSACS 4.x) pushed vpn components (determined by the group the user logging in belongs to). Everything seems to be working, url-lists,...
HiWe're working on writing a very simple web app to control a couple of access points via SNMP. I'm trying to shutdown the Wireless interface via SNMP WRITE with the following oid;.1.3.6.1.2.1.2.2.1.7.1and.1.3.6.1.2.1.2.2.1.7.2But its saying the int...
Unfortunately, after two weeks of working at this with TAC, having them demo and it and prove that they too couldn't get it working as it was on earlier hardware...wouldn't confirm or deny the bug and we ended up having a work around which involved m...
I'm not sure I follow...are you saying according this Cisco this should work, and since it's not it's a bug...I also checked the feature tool before opening this post, but as I've seen in the past, that tool is not the final word/gospel and MANY time...
No, it’s the response from the server, which is the owa, that we want going out the other feed. So when users connect to him in from this second feed, he has to respond back out that second feed.Your version would force traffic from this host, desti...
