Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am looking to see if multiple admin and device groups can be created to limit certain administrators to administrate only certain devices but not others.For example:admin group "ag_na" (including user admin1 & admin2) can make changes to device gr...
I'm looking into an issue using the Cisco VPN client behind a MS Small Business Server with ISA implemented to connect to a VPN 3005.If the client uses transparent tunneling and checks UDP on client, should this work? or are there problems with the w...
I'm seeing switch underruns climb slowly on a 3548 XL switch with about 35 servers on it all running 100 / Full Duplex (Auto dedected) on same VLAN. No other large amount of errors exist, except that output buffer failures equal overruns.Switch utili...
I have a lab PIX with 6.3(3) on it and I tried to setup a logical interface with the following:"interface ethernet2 10 logical"This fails to create a logical interface, do I have to create a vlan somehow first?PIX is 515 (Not the E type) and has a re...
I have noticed that several times a day users loose their connection and upon review of workstations with 350 wireless adapters they loose their IP address even though they are still associated with AP. Re-authenticating did not seem to help, but abo...
As I understand it, the failover will not occur because the link from your MX to your WAN ISP is still active and even though the ISP link is down, the MX67C will not failover. For the failover to occur, 3 things must ALL fail. 1.) DNS lookup, 2.) IC...
If you are changing management VLANs you will likely have to change your remote device VLAN assignment as well or you will loose connectivity to management of the remote devices. For instance on a L2 switch located in a remote closet the default VLAN...
Thanks for the URL...Changing gears a bit: We have debated using client on machines behind the MS SBS ISA server as their are 30 + users does anyone know if a Cisco VPN 3005 can setup a site-to-site VPN with MS SBS running ISA? Samples and caveats???...
This helped a lot, Thanks!FYI, I spent another day finding another problem, here is the scoop if your interested...When you setup the vlan with the "physical" entry the firewall uses a different native vlan than expected. Just by luck I found that if...
