About trilerian

trilerian · 07-19-2021

Wifi 802.1x and dhcp issues I am running an NPS on Windows server 2016 and can authenticate wireless clients without issue. The problem comes with connecting on an interface that isn’t on the dhcp vlan. Cisco VWLC, normal data vlan is 10, with 10.x...

trilerian · 12-03-2019

I didn't really know where to put this. I have 3 new 2960x's in a stack. Switch 2 keeps losing power after a few hours. Currently there is nothing but the flex cables and power cables plugged into the switches as I am going to replace our current ...

trilerian · 10-28-2019

Hello! Being pretty new to networking, I need some help understanding QOS (I have done a lot of reading and I understand what it is, just not sure how to see if it is correct). I have been in my current role for 6 months and it is now time to upgra...

trilerian · 09-24-2019

In packet tracer, I am trying to setup multiple ssid's on a WLC, each on its own vlan. I would like clients to be able to connect to the ap's and get a dhcp address for the ssid they connect to. So far, I can only get clients to get a dhcp address ...

trilerian · 09-23-2019

I am having a problem with the 2504 WLC in packet tracer 7.2.2.0418. The issue is once I finish the initial setup and the wlc reboots, it never comes back up. I can't ping it, or connect via web address. I have verified connectivity before running...

trilerian · 07-27-2021

If anyone else runs into this issue I did end up solving it for my network. I did not have the new interface on the switch connected to my vmware hosts which meant I assume, the VWLC didn't see it. Why this worked with PSK I don't know. But I crea...

trilerian · 07-21-2021

Thanks for the document, all in one place instead of all over internet. Wish I would have had that to set it up originally. But, I am still having the same issues. Like I said, the clients connect to the wireless profile just fine, it is only when...

trilerian · 07-20-2021

The APs are in flex connect and they are on trunk ports with the vlans allowed. This interface works fine when used with a WLAN using wpa2 and psk.

trilerian · 07-19-2021

I'm not quite sure what you mean by mode. Band? Both 2.4 and 5.

trilerian · 12-09-2019

Sounds to me like the default gateway of the AP is incorrect.

Member Since	‎09-23-2019 10:25 AM
Date Last Visited	‎07-29-2021 07:54 PM
Posts	23
Total Helpful Votes Received	15

User Statistics

User Activity

Wifi 802.1x and dhcp issues

Power Issues with 2960x

QOS, avaya phones

DHCP for multiple ssid, WLC, packet tracer

Packet tracer WLC issue

Re: Wifi 802.1x and dhcp issues

Re: Wifi 802.1x and dhcp issues

Re: Wifi 802.1x and dhcp issues

Re: Wifi 802.1x and dhcp issues

Re: Can't ping Wifi Access Points on one vlan from client on another vlan