Hello,I would like a specific subnet to see a route in the routing table where other subnets are not able to see it. For example, let's say I want 10.1.1.0/24 to be able to route to 192.168.1.0 255.255.255.0 via next hop 1, but all other networks us...
I am doing route filtering with acl for an EIGRP AS. I have an issue with two /24 of a /20 that are coming through even though there is a deny statement for those networks.
The subnets in particular are 172.26.110.0/24 and 172.26.120.0/24
Here is my...
I was able to get this done today. I used an extended ACL because this was only for specific networks to specific network. I didn't use the sla. So far so good. Thanks
This seems like a pretty easy solution. I assume the route needs to be in the table for this to work and other networks will not use it based on the ACL.Thanks, I'll update as the solution once I get it applied. May take a bit, lots of projects... ...
Replying to my own post. That did the trick...
60 deny 172.26.96.0, wildcard bits 0.0.15.255 (2 matches)70 deny 172.26.112.0, wildcard bits 0.0.15.255 (2 matches)90 permit 172.26.0.0, wildcard bits 0.0.255.255 (20 matches)
.jpg "VIP Mentor"){kind=icon}
