Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi. I must be mising something simple. This access-list/access-group combination worked with PIX 6.X code and the PIX 7.X code, but it won't work with the ASA 7.X code. It's a pretty simple access-list:access-list outside-acl extended permit icmp ...
Hi. If this has been asked before, I apologize and please direct me to the post -- I could not find it.My question is a little unique. I have a community network where different companies can join to share resources. I am working with one company...
Hi. I have a Catalyst 2950 with four servers on it; three of them stream multicast and one reeives it. As long as the switch is not connected to any other part of the network, this works fine. However, as soon as I connect it to the rest of the ne...
Hi. I have a PIX 515 that has several working VPN Connections to it. We are trying to get a SonicWall to connect but we are having problems. However, I don't think that the problem has anything to do withthe SonicWall itself -- I don't think we're...
I have tried two different versions of the Cisco VPN Client (both of them Version 4 flavors), and the Acer TravelMate will Blue Screen after installation. If I boot to Safe Mode and uninstall the Client, the machine works fine. The machine is runni...
I have seen this work IF the client is also using a proxy server (such as Microsoft ISA). In that way, the client, which usually only uses email and web, will go the the ISA server and the gateway won't matter.Howwver, as others have pointed out, "n...
line aux 0 no exec stopbit 1 <-- may not be needed, but I always put it in login I think that's it...but it's been a while and I don't have a reference in front of me.
The issue is that you cannot define more than one default route (with the new code, you can define three but only on the same interface). The ideal solution would be to use a router, where you could do policy-based routing to make these decisions fo...
I don't really understand what you're saying, but each separate tunnel has to have its own LAN-to-LAN connection in the concentrator. So if you have 5 PIX firewalls, you need 5 corresponding tunnels configured on the concentrator.
