Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to acheive redundancy for AA configured in Unity in a Centralised UCM 7.x environment for a remote site in SRST using TLC script, the solution works fine in MGCP environment but I'm trying to acheive it utilizing H323 as the link is CAS R2...
After updating the JTapi Application and restarting the Publisher, a message showed next to the Callmanager Version :"Cisco CallManager CDBLException Dump: [COM Error] COM Error Description = [ADO=0x80004005: [Microsoft][ODBC Driver Manager] Data sou...
Befor about 9 months I installed 20 sites Linking to 2 Omnis in Diversity mode in a 6km radius and the network was working fine with WEP enabled using 4.25H firmware, when I added 5 more sites (using 4.25G Firmware) the Root bridge started to reboot ...
Thank you for your reply, but I already tried this and it still hunts to the pots dial-peer a snapshot of the config is as follows :dial-peer voice 1 pots incoming called-number . direct-inward-dial!dial-peer voice 10 voip preference 0 incoming calle...
well the only way I can see you doing this is assigning unique Partitions and CSS for each user and use FAC level for each user as well as Route Patterns.It's a lot I know but the only limitation is the Hardware specs of your CallManager Server
Hi,Had the same problem here, if you checked the whole trouble shooting tips on this DOC:http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/troubleshooting/guide/ex/tsg_0500.html then try to delete the integration and add it again the MWI will w...
Problem Resolved, Found out that the CallManager Service for the Publisher not started and the CTI Manager Service is Hanging, as well as the Admin Username and Passwords for the cervices and the Dartabases. As soon as the changes were made with a re...
I Updated the Main to 12.01T and found out the problem, 12.01T firmware recognised the old 20 sites with firmware 11.07 but did not recognise the devices with firmware 11.23T and caused the device to reboot every 30 seconds but when I upgraded the 5 ...
