About r.majo

r.majo · 05-20-2002

We have a 3640 router connected to a PBX using an E1 connection with the following configuration:controller E1 3/0 framing NO-CRC4 clock source internal line-termination 75-ohm ds0-group 0 timeslots 1-12 type e&m-i...

r.majo · 05-13-2002

We are using the auxiliary interface of a 2610 and 1720 to link each other.Then from the 1720 we are using a serial interface WIC 1T to connect to an Automatic tleller Machine through a modem connection. The modem connection is asynchronous.In normal...

r.majo · 06-16-2003

Will,The answer attached by Taimor is O.K.However you must add the command: direct-inward dial in the dial-peer .. pots.If you are going to change the number adding a new code at the begining of the number, you can use the command: prefix ABCD.This p...

r.majo · 05-15-2003

Hello, my name is Roger.I suppose that you have a public range of addresses for internet access and a ip wan.You have to define another NAT for this second serial interface and another pool.To disgregate the LAN traffic you have to use an access-list...

r.majo · 05-23-2002

Dear Don,I suposse one 3640 is handling only the voice as a voice-gateway and the other 3640 forward data and voz. See diagram:IP/PVN ------------------3640-A------------------3640-B----------------PBX WAN ...

r.majo · 05-20-2002

Hello Mike-Banks.We do not have a similar application but we have a customer that handle voice and data ( internet, corporative email, traffic ) and due problems with the voice we changed the encapsulation from ppp to frame-relay.The final configurat...

r.majo · 04-24-2002

My name is Roger Majo and my team and I are very interested to participate in the VC Design Guide.Would you be so kind sending us the VC design guide, please?Attentively,My email is: roger.majo@telefonica-data.com.peRoger F. MajoTelefonica Data Peru ...

Member Since	‎10-30-2001 07:36 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	7

User Statistics

User Activity

Can not receive fax transmission over an E1 link.

An Automatic Teller Machine does not respond to calls sent by a HOST.

Re: VOIP Backup

Re: Leased Line Trafic manipulation

Re: 3640 problem with voice

Re: Frame-Relay Traffic Shaping

Re: Video Conferencing Design Guide