About Douglas_Turner

Douglas_Turner · 03-04-2020

I have an Axis A-8004 communicating with Call Manager that has an issue with the DTMF. The unit is communicating fine, the VMS button calls the extension and video and voice transmits fine. The issue is with the DTMF sending button presses multiple t...

Douglas_Turner · 01-20-2020

I have a new SG550x-48MP, I logged in and changed the password, as soon as I tried to save the configuration the switch locked up and I couldn't get back in. I tried using the wizard, starting with the vlans, and starting with the systems settings. I...

Douglas_Turner · 11-02-2019

I have two 3850s that are connected via copper. I can connect a device to each switch and can see the switch but I cannot see the other switch or other devices connected to the switch. I know I missed something in the config but can't find it. I am w...

Douglas_Turner · 01-21-2020

The firmware is 2.4.5.71.I have tried edge, firefox and chrome. I did not save the password.I have found that things go fine until I try to assign an IP to one of the vlans.

Douglas_Turner · 11-03-2019

Thank you all very much. I do apologize I removed ports 1/0/2 thru 1/0/47 from the config to make it smaller. I will be using port 48 on each switch as the connection. I will make the changes to each switch. Thank you all again

Member Since	‎11-02-2019 04:26 PM
Date Last Visited	‎03-06-2020 12:07 AM
Posts	5

User Statistics

User Activity

DTMF- Third Party SIP Intercom issue

SG550X configuration failure

3850s not talking

Re: SG550X configuration failure

Re: 3850s not talking