I face a big problem I have system voice(CM6 + CRS + GW + 4 FXO + PRI E1) when anybody calls me >>>> the call succeed but the caller Number presentation delivered with errors Example: ORiginal No.: 0101060624Received No.: 0 01060624 ORiginal No...
i have a problem with Cisco Core Switch 6509-E in its boot as following: ------------------------------------------------------------------------------------------------------------rommon 3 > dir bootflash: Initializing ATA monitor library...Director...
i have cisco 1841 router and i configured a remote access vpn on it to support both laptops and avaya ip phones.the laptops are working without problem on the vpn and connected.but when the ip phone try to connect i get error connecting to the vpn an...
Greetings,I have HTC with windows mobile 6.1 and also i have PIX515E and i need to configure a VPN that enable me to connect from my htc to my local network which vpn (IPSEC, anyconnect, .. ) will be valid for this mobile.Thanks,
i have a question in this, as mentioned in the configuration guide for this HWIC , what is the meaning of : The number of routed interfaces for both the HWIC-4SHDSL and HWIC-2SHDSL is two.
Dear Sir,Thanks for your support and followint my answers:how does the voice gateway integrate with CUCM (MGCP)? Do the calls come in from the FXO ports or PRI? the calls come in from PRIThanks,Abdelhai
i know that the connector is RJ-45 but what i mean is if the HWIC-4SHDSL can provide only two routed connection so the HWIC-2SHDSL can do this also so what is the difference between both of them
what about the 4 port RJ-11 that this HWIC can made, what i know is this HWIC can make one RJ-54 to 4 RJ-11 each can make a connection to a router, is that true?
