About paulkilcoyne

paulkilcoyne · 10-13-2016

Hi and thank you for the reply. the ISPs are not sending a default route here. The closet thing to t...

paulkilcoyne · 10-13-2016

To whom it concerns, I have the following topology; Two WAN circuits terminated on two separate Cisc...

paulkilcoyne · 07-29-2016

Hi Joseph, great answer, I will implement as suggested and also set marking of BE for class-default....

paulkilcoyne · 07-28-2016

Dear Cisco experts, I'm rolling out QoS on a WAN network. On the LAN facing interface of a 3845 rout...

paulkilcoyne · 07-13-2015

Thanks for the reply. We own the edge router, we mark the voice packets and assign the priority and ...

paulkilcoyne · 07-13-2015

Thanks for your reply,any tips on how to configure VRFs for the 6500s? I've never done so before. Al...

paulkilcoyne · 07-12-2015

Hi,Im deploying a cisco network whereby a pair of 6509 switches running VSS act as a collapsed core ...

paulkilcoyne · 06-22-2015

Great thank you. Is there any good one stop webpage that details Cisco SFPs specifications? Regards,...

paulkilcoyne · 06-22-2015

Hi all,two queries I cannot find an answer for: 1. is the SFP-10G-LR compatible with the ASR 1002 ro...

paulkilcoyne · 04-09-2014

Hi all,is there a way of extracting a list of hostnames ( for devices in EMEA ) and their associated...

paulkilcoyne · 11-14-2013

Hi again,and thanks for all your help here it's much appreciated. One last thing, on a similar switc...

paulkilcoyne · 11-14-2013

Hi Guys,thanks for the speedy responses. Here's the output of the "show module":Mod Ports Card Type ...

paulkilcoyne · 11-14-2013

Hi all Cisco experts,recently I tried installing a WS-X4648-RJ45V+E 10/100/1000 PoE blade into slot ...

paulkilcoyne · 05-04-2012

Dan,I got it to work Switch#sh int status | inc connected.* 4Fa1/0/3 connected 4 a-full a-100 10/100...

paulkilcoyne · 05-04-2012

So it looks like there is no way to do this then?If | represents the logical ORwhat represents the l...

Hi and thank you for the